| Transceiver: |
Motorola Series
IV 3-watt Cellular Radio
TNC connector |
| Power Supply: |
Three-prong
Vac adaptor |
| User Interface: |
One RJ11 jack
for telephone or data equipment, one RJ11 for telco line,
one RJ 45 for programming and testing.
EMI Filtering.
AutoSafe© Automatic transceiver activation.
Reverse polarity protection for DC power source.
Transient and overcurrent protection for DC power source
plus tip and ring of phone and telco jacks.
Self-resetting overcurrent fuses.
Two-wire loop start.
Ring Voltage: 25 Hz, 60 Vrms, 150 V p-p.
Dial Tone: 350 Hz/440 Hz square wave DTMF or Rotary.
DTMF or Rotary Maximum REN=3.
Maximum wiring: 2,550 feet, 22 gauge (twisted pair).
Optional battery module - 24 hour standby, 2 hours talk
time.
Includes charger circuit with cut-off to insure long battery
life. |
|
Line Sensor
for automatic switching from land line to cellular service
if the line has been cut or dial tone is absent. A cellular
call in progress is not interrupted when landline service
is restored. |
| Environmental: |
Indoor use
only
-10C to 60C (14F to 140F) operating
-40C to 80C (-40F to 176F) storage
5% to 95% relative humidity, non-condensing |
| Size: |
CPE ONE -
9 inches by 9 inches by 1-1/4 inches high
CPE ONE BM - 9 inches by 9 inches by 3/4 inches high |
| Weight: |
CPE ONE -
4 pounds
CPE ONE BM - 5 pounds |
