|
The
RTS-DataPak is manufactured under U.S. patent 7,110,778 and
other patents.
| Transceiver/Modem: |
CDMA: Wavecom
Q2438; GSM: Wavecom Q2426. Other transceivers may be used
depending on technical requirements, availability, operational
parameters, and ease of use.
TNC connector. |
| Power Supply: |
Autoranging,
input range 85 to 320 VAC, 120 to 277 VAC nominal; supply
rated at 50, 30 or 15 watts as needed. Power consumption
is 0.5 watts standby, 10 to 20 watts operational depending
on transceiver/modem used.
Self-clinching terminal block input, user replaceable
fuses, varistors, RFI filtering and shielding, power indication
LED, locking connectors, external ground lug.
Battery charger; optional backup battery and mounting
bracket; 4.4 hours standby, 2 hours operating.
Complete optional solar-powered assemblies for a variety
of applications. |
| User Interface: |
RS-232 (DB9)
setup port for programming and status inquiry. Access
via PC or laptop communications program.
Display of signal (RSSI), telephone number, and baud rate.
LED to indicate idle, ring,
and data transmission.
Remote status inquiry from any landline via PC or laptop
communications program.
Serial Model RTS-DataPak-S: Switch to select RS-232 or
RS-485.
RS-232 data connection via barrier strip terminal block:
SIGNAL GND, RX, TX, SHIELD.
RS-485 connection via barrier strip terminal block: RX+,
RX-, SHIELD RX, SHIELD TX, TX-, TX+.
RS-485 termination switch. Data rate can be set to 2400,
4800, 9600, 19200, 38400, or 48000 kbp.
Modem Model RTS-DataPak-M: RJ11 jack for data transmission
via Hayes-compatible modems.
Two-wire loop start, AutoSafe automatic transceiver reset
in case of accidental shutdown.
Ring voltage 20 Hz 200 V p-p. Dial tone 350 Hz/440 Hz
square wave; maximum REN=5.
Data rate self-adjusting to 300, 600, 1200 or 2400 baud.
Mobile originated data calls to a maximum of three preprogrammed
landline telephone numbers.
|
| Environmental: |
NEMA 3R enclosure
for outdoor and indoor use.
-40F to 140F (-40C to 60C) operating,
-40F to 176F (-40C to 80C) storage.
5 percent to 95 percent humidity, non-condensing.
Thermal shutoff protection for transceiver/modem included. |
| Mechanical: |
Aluminum enclosure,
size is 11 inches H x 8.5 inches W x 3.5 inches D.
Weight is approx. 8 pounds.
3 Punch-outs for 1/2-inch conduit to accommodate electrical
and telephone wires; securable stainless steel latch. |
|
